Frequency Option
➢ 800Mhz: 806-826Mhz ➢ 1.4Ghz: 1428~1448 MHz |
| Key Features
➢ 3*100Mbps Ethernet port support 2way TCP/UDP and IP Camera access to ➢ Dual Tx antenna and Rx antenna for stable signal transmission ➢ AES128 bit encryption ➢ Transmission rate upto be 3Mbps ➢ 1*Serial port support MAVLINK TELEMETRY ➢ Serial Data: (Voltage:TTL(±3.3V) |
Specifications
| Frequency | 800Mhz | 806~826 MHz |
| 1.4Ghz | 1428~1448 MHz | |
| Bandwidth | 8MHz | |
| RF Power | 0.4Watt (Bi-Amp, 0.4watt Peak Power of each power amplifier) | |
| Antenna Gain | 800Mhz TX:Omni antenna 25cm 2dbi | 1.4Ghz TX:Omni antenna 35cm 3.5dbi |
| Transmit Range | 800Mhz: 7km | |
| 1400Mhz: 8km | ||
| Transmit Rate | 3Mbps (Video Stream, Ethernet Signal and serial data share) | |
| Baud Rate | 115200bps(Adjustable) | |
| Rx Sensitivity | -104dbm@4Mhz | |
| Fault Tolerance Algorithm | Wireless baseband FEC forward error correction | |
| Video Latency | The video not be compressed. No latency | |
| Link Rebuild Time | <1s | |
| Modulation | Uplink QNSK/Downlink QNSK | |
| Encryption | AES128 | |
| Start Time | 15s | |
| Power | DC-12V (7～18V) | |
| Interface | Interfaces on Tx and Rx are same | |
| Video input/Output: Ethernet×3 | ||
| Power Input Interface×1 | ||
| Antenna Interface: SMA×2 | ||
| Serial×1: TTL(±3.3V) | ||
| Indicators | Power | |
| Ethernet Status Indicator | ||
| Wireless Connection Setup Indicator x 3 | ||
| Power Consumption | Tx: 4W(Max) | |
| Rx: 3W | ||
| Temperature | Working: -40 ~+ 85℃ | |
| Storage: -55 ~+100℃ | ||
| Dimension | Tx/Rx: 57 x 55.5 x 15.7 mm | |
| Weight | Tx/Rx: 65g | |
| Metal Case Design | Conductive anodizing craft | |
| CNC Technology | ||
| Double Aluminum Alloy Shell | ||
Emergency Ad-hoc Network Solution Portable Emergency Command System Drone Video Transmitters 5km UAV Video Transmitter 10km Drone Video Transmitter 50km Drone Video Transmitter 100km Airborne Video Downlink NLOS Wireless Video Transmitter PtMP Wireless Video Transmitter Wireless MESH Network