English 
 |
FNM-8416
Product Description
Frequency Option
➢ 800Mhz: 806-826Mhz
➢ 1.4Ghz: 1428-1448 MHz
 Key Features ➢ 3*100Mbps Ethernet port support 2way TCP/UDP and IP Camera access to ➢ Dual Tx antenna and Rx antenna for stable signal transmission ➢ AES128 bit encryption ➢ Transmission rate up to be 6Mbps ➢ 1*Serial port support MAVLINK TELEMETRY ➢ Serial Data: Voltage:TTL(±3.3V) |
 ➢ Baud Rate: 115200bps ➢ Video Input Interface: Ethernet RJ45 Port ➢ Both 1400Mhz and 800Mhz support NLOS ➢ Low Latency less than 50ms ➢ Weight 65g ➢ Power Input: DC7-18V |
Specifications
| Frequency | 800Mhz | 806~826 MHz |
| 1.4Ghz | 1428~1448 MHz | |
| Bandwidth | 4MHz | |
| Transmit Range | 800Mhz: 16km | |
| 1400Mhz: 14km | ||
| RF Power | 0.6Watt (Bi-Amp, 0.6watt Peak Power of each power amplifier) | |
| Antenna Gain | 800Mhz TX:Omni antenna 25cm 2dbi | 1.4Ghz TX:Omni antenna 35cm 3.5dbi |
| Transmit Rate | 3Mbps (Video Stream, Ethernet Signal and serial data share) | |
| The best video stream: 2.5Mbps | ||
| Baud Rate | 115200bps(Adjustable) | |
| Rx Sensitivity | -104dbm@4Mhz | |
| Fault Tolerance Algorithm | Wireless baseband FEC forward error correction | |
| Video Latency | The video not be compressed. No latency | |
| Link Rebuild Time | <1s | |
| Modulation | Uplink QNMK/Downlink QNMK | |
| Encryption | AES128 | |
| Start Time | 15s | |
| Power | DC-12V (7～18V) | |
| Interface | Interfaces on Tx and Rx are same | |
| Video input/Output: Ethernet×3 | ||
| Power Input Interface×1 | ||
| Antenna Interface: SMA×2 | ||
| Serial×1: TTL(±3.3V) | ||
| Indicators | Power | |
| Ethernet Status Indicator | ||
| Wireless Connection Setup Indicator x 3 | ||
| Power Consumption | Tx: 5W(Max) | |
| Rx: 3.5W | ||
| Temperature | Working: -40 ~+ 85℃ | |
| Storage: -55 ~+100℃ | ||
| Dimension | Tx/Rx: 57 x 55.5 x 15.7 mm | |
| Weight | Tx/Rx: 65g | |
| Metal Case Design | Conductive anodizing craft | |
| Double Aluminum Alloy Shell | ||
| CNC Technology | ||
